Benelli Velvet 150, 2011
Specifications
ENGINE
TYPE
Single cylinder, 4 stroke, air cooled, 2 Valves, single overhead camshaft
DISPLACEMENT 151 c.c.
BORE x STROKE 57,6 x 57,8 mm
COMPRESSION RATIO 10,7:1
RATED OUTPUT 8,4 kW (11,4 CV) @ 8000 rpm
MAX. TORQUE 10,8 Nm (1,1 kgm) @ 6500 rpm
FUEL SUPPLY Carburetor Æ26 mm – PD26JC G10
LUBRICATION Wet crankcase
Motore/Engine: 900c.c.
Gearbox: 130c.c.
EXHAUST SYSTEM With catalytic converter
CERTIFICATION Euro 3
CLUTCH Automatic centrifugal dry clutch
PRIMARY DRIVE V belt
FINAL DRIVE Gears in oil bath
ELECTRIC EQUIPMENT
IGNITION CDI
SPARK PLUG NGK CR8E
STARTING ELECTRIC
CHASSIS
- FRAME Steel trestle with a double cradle in high tensile strength steel tube
- FRONT SUSPENSION Hydraulic telescopic fork ø33 mm
- FRONT SUSPENSION STROKE 95 mm
- REAR SUSPENSION Floating engine with double hydraulic rear dumper
- REAR SUSPENSION STROKE nd
- FRONT BRAKE Steel disk ø241 mm with floating double piston caliper
- REAR BRAKE Steel disk ø220 mm caliper with two opposed pistons
- FRONT RIM TYPE Aluminium alloy
- FRONT RIM 3,00”x13”
- REAR RIM TYPE Aluminium alloy
- REAR RIM 3,50”x12”
- FRONT TYRE 120/70-ZR13 53 L ( 53P) - (130/60 ZR13 53 J )
- REAR 130/70 ZR12 56 L (62P) - (130/70 ZR12 56 J )
DIMENSIONS
- LENGHT 2010 mm
- WIDHT EXCLUDING MIRRORS 730 mm
- HEIGHT EXCLUDING MIRRORS 1160 mm
- SEAT HEIGHT 830 mm
- WHEELBASE 1460 mm
- GROUND CLEARANCE N.D
- TRAIL N.D
- STTERING PIPE ANGLE N.D
- UNLADEN WEIGHT 123 kg
- ROAD READY WEIGHT 129 kg
- PERMITTED TOTAL WEIGHT 279 kg
- USABLE TANK VOLUME 9.5 l
- RESERVE nd
